How to Compare and Order Fractions (With Examples)
To compare two fractions, use whichever of these fits first:
- Same bottom number? The bigger top wins: 5/8 > 3/8.
- Same top number? The smaller bottom wins: 3/5 > 3/8.
- Neither? Rewrite both over a common denominator, or cross-multiply. 7/12 vs 5/8 becomes 14/24 vs 15/24, so 5/8 is bigger.
To order a list, put every fraction over the same denominator and then sort the tops. The rest of this guide shows each method with worked examples, the shortcuts that save time, and the mistakes that catch people out.
Type any two fractions into the Check two fractions tab below to see which is bigger and by how much:
Leave one box empty (or type ?) and the calculator fills it in.
Pick the Fastest Method
| What you see | Quickest method | Example |
|---|---|---|
| Same denominator | Compare the numerators | 7/12 > 5/12 |
| Same numerator | The smaller denominator is bigger | 4/7 > 4/9 |
| One fraction above 1/2, one below | Compare with 1/2 | 5/9 > 3/7 |
| Both close to 1 | Compare the missing pieces | 9/10 > 7/8 |
| Anything else, two fractions | Cross-multiply | 5/8 vs 2/3: 15 < 16 |
| A whole list | Common denominator | 3/4, 5/8, 2/3 over 24 |
| A mix of fractions, decimals and percents | Convert everything to decimals | 0.6, 5/8, 62% |
None of these is a trick. They all come from the same idea: a fraction is a number of equal pieces, and you can only compare counts when the pieces are the same size.
Same Denominator: Compare the Tops
When two fractions have the same bottom number, they’re cut into pieces of the same size. 3/8 is three eighths and 5/8 is five eighths, so 5/8 is bigger, just as 5 coins of the same kind are worth more than 3.
- 7/12 > 5/12, because 7 > 5.
- 2/9 < 8/9, because 2 < 8.
- 11/6 > 7/6, because 11 > 7. This works for improper fractions too.
Ordering is just as quick. 7/13, 12/13 and 9/13 go from smallest to largest as 7/13, 9/13, 12/13, and from largest to smallest as 12/13, 9/13, 7/13.
The rule only works when the bottoms match. 3/10 has a bigger top than 1/2, yet 3/10 is the smaller fraction. Comparing tops alone across different bottoms gives answers that are right only by luck.
Same Numerator: The Smaller Bottom Wins
When the tops match, you have the same number of pieces, but the pieces are different sizes. A smaller bottom number means fewer, bigger pieces. A third of a cake is more than a quarter of it, so 1/3 > 1/4. With 3 pieces each, 3/5 > 3/8, because fifths are bigger than eighths.
- 4/7 > 4/9
- 2/3 > 2/5
- 4/3 > 4/5. The first is more than 1 whole, the second is less.
To order fractions with the same numerator, sort the bottoms the other way round. 4/5, 4/9, 4/3 and 4/7 in ascending order are 4/9, 4/7, 4/5, 4/3. The bottoms run 9, 7, 5, 3, from biggest to smallest.
Different Tops and Bottoms: Use a Common Denominator
When neither number matches, make the bottoms the same. Find a number that both denominators divide into, rewrite each fraction over it, then compare the tops.
Example: 5/6 or 7/9?
- Both 6 and 9 divide into 18.
- 5/6 = 15/18 (multiply the top and bottom by 3).
- 7/9 = 14/18 (multiply the top and bottom by 2).
- 15/18 > 14/18, so 5/6 is bigger, by 1/18.
Example: 7/12 or 5/8?
- Both 12 and 8 divide into 24.
- 7/12 = 14/24 and 5/8 = 15/24.
- So 5/8 is bigger, by 1/24.
You can always use the two denominators multiplied together as the common denominator. For 7/12 and 5/8, that’s 96. It works, but the numbers get large. The smallest number both bottoms divide into, the lowest common denominator, keeps the arithmetic small. For 12 and 8 it’s 24. The LCM & GCF Calculator finds it for any set of denominators, including long lists.
If the rewritten fractions come out with the same top, the two fractions are equal. 6/9 and 4/6 both become 12/18, so 6/9 = 4/6.
Cross-Multiplying: The Two-Fraction Shortcut
For a quick comparison of two fractions, multiply each numerator by the other fraction’s denominator, then compare the two products.
Example: 5/8 or 2/3?
- 5 × 3 = 15, the product on the 5/8 side.
- 2 × 8 = 16, the product on the 2/3 side.
- 15 < 16, so 5/8 < 2/3.
Keep each product on the side of the numerator you started with. Swapping them by accident gives the wrong answer.
Why it works. Cross-multiplying is the common-denominator method in disguise. Over the denominator 8 × 3 = 24, 5/8 becomes 15/24 and 2/3 becomes 16/24. The cross products, 15 and 16, are exactly those new numerators. You just skip writing the 24.
Two more examples:
- 3/7 or 4/9? 3 × 9 = 27 and 4 × 7 = 28, so 3/7 < 4/9.
- 11/12 or 13/15? 11 × 15 = 165 and 13 × 12 = 156, so 11/12 > 13/15.
If the products are equal, the fractions are equal: for 6/9 and 4/6, 6 × 6 = 36 and 4 × 9 = 36.
Cross-multiplying needs positive denominators. With a fraction like 3/(−4), move the minus sign to the top first, so it becomes −3/4, and then compare. It also only handles two fractions at a time. For longer lists, a common denominator is faster.
Make the Tops the Same Instead
A common denominator isn’t the only way to line fractions up. You can also give them the same numerator, which is sometimes much easier, especially when one top divides into the other.
Example: 2/7 or 4/15?
- Multiply the top and bottom of 2/7 by 2 to get 4/14.
- Now compare 4/14 with 4/15. The tops match, so the smaller bottom wins.
- 14 < 15, so 4/14 is bigger, and 2/7 > 4/15.
A common denominator here would be 105, which is much more work. Matching the tops took one small multiplication. It’s worth a quick look at the numerators before reaching for the denominators: if one is a small multiple of the other, this route is shorter.
Simplify Before You Compare
Fractions with large numbers often hide simple values. Reducing them first can turn a hard comparison into an easy one.
Example: 18/24 or 15/20? Divide 18/24 by 6 and you get 3/4. Divide 15/20 by 5 and you also get 3/4. They’re equal, and no cross-multiplying was needed.
Example: 35/56 or 24/40? 35/56 reduces to 5/8 (divide by 7), and 24/40 reduces to 3/5 (divide by 8). Now cross-multiply the small versions: 5 × 5 = 25 and 3 × 8 = 24, so 35/56 is bigger. Cross-multiplying the originals gives the same answer, 1,400 vs 1,344, but with far bigger numbers to multiply.
To reduce a fraction, divide the top and bottom by their greatest common factor. The Fraction Calculator simplifies any fraction and shows the factor it used.
Benchmarks: Compare With 0, 1/2 or 1
Sometimes you can tell which fraction is bigger without any multiplying, by comparing each one with a fraction you know well.
Half as a benchmark. A fraction is more than 1/2 when its top is more than half its bottom. Double the top and compare it with the bottom:
- 5/9: 5 × 2 = 10, which is more than 9, so 5/9 > 1/2.
- 3/7: 3 × 2 = 6, which is less than 7, so 3/7 < 1/2.
So 5/9 > 3/7 without any further work. The Equivalent Fractions of 1/2 page has more on this test.
One as a benchmark. For fractions just under 1, compare what’s missing. 7/8 is 1/8 short of a whole, and 9/10 is 1/10 short. Since 1/10 is the smaller gap, 9/10 > 7/8.
Where benchmarks stop working. They only settle the question when the two fractions fall on different sides of the benchmark, or when the gaps are easy to compare. 5/8 and 2/3 are both above 1/2 and both below 1, so neither benchmark helps, and you need cross-multiplying. The “missing piece” idea also only works for fractions below 1. Above 1, flip it and compare how far each fraction goes past 1: the bigger overshoot wins. 3/2 is closer to 1 than 7/4 is, but 7/4 is the bigger number, because it goes 3/4 past 1 while 3/2 goes only 1/2 past.
Converting to Decimals or Percents
With a calculator such as CalcSolver, dividing top by bottom turns every fraction into a decimal you can compare directly:
- 3/4 = 0.75
- 5/8 = 0.625
- 2/3 = 0.666…
So 5/8 < 2/3 < 3/4. This is the easiest method when you’re mixing fractions with decimals and percents, or comparing more than a few values. The Fraction to Decimal Chart lists the decimals for the common fractions.
Be careful with rounded values. If two fractions are close, rounding can hide the difference or even reverse it. 0.67 looks the same as 2/3, but 0.67 is bigger, by 1/300. The 2/3 as a percent and decimal page explains why. When fractions are close, keep at least four decimal places, or use cross-multiplying instead. A spreadsheet avoids the problem: a formula like =A2/B2 keeps the full decimal, so sorting by that column puts even very close fractions in the right order.
Using a Number Line
A number line shows the order of fractions at a glance. To place a fraction between 0 and 1, split that stretch into as many equal parts as the denominator, then count along by the numerator. 5/6 sits five sixths of the way from 0 to 1.
For a fraction bigger than 1, turn it into a mixed number first. 7/3 = 2 1/3, so it sits a third of the way from 2 to 3.
Plotting 1/2, 5/6 and 7/3 gives the order straight away: 1/2, 5/6, 7/3. 1/2 is in the middle of the first stretch, 5/6 is near its end, and 7/3 is past 2.
The further right a fraction sits, the bigger it is. That rule holds for negative fractions too, which sit to the left of 0.
Fraction Strips and Area Models
Before the rules make sense, it helps to see the sizes. Fraction strips are bars of the same length, each cut into a different number of equal parts: one bar in halves, one in thirds, one in quarters, and so on, stacked one above the other.
To compare 2/3 and 3/4, shade 2 parts of the thirds bar and 3 parts of the quarters bar. The shaded part of the quarters bar reaches further, so 3/4 is bigger. The unshaded ends show why: the gap on the thirds bar is one third, and the gap on the quarters bar is only one quarter.
An area model does the same job with rectangles. Draw two identical rectangles. Cut one into 3 columns and shade 2. Cut the other into 4 columns and shade 3. Then cut the first rectangle into 4 rows and the second into 3 rows. Both are now split into 12 equal boxes, with 8 shaded in the first and 9 in the second. That’s 8/12 vs 9/12, which is the common-denominator method drawn as a picture.
Both models only work when the bars or rectangles are the same size. That’s the picture version of comparing fractions of the same whole.
Ordering a Whole List
To sort several fractions with different denominators, put them all over one common denominator.
Example: order 3/4, 5/8, 2/3, 7/12 and 5/6 from smallest to largest.
- Find a common denominator. 4, 8, 3, 12 and 6 all divide into 24.
- Rewrite each fraction over 24:
| Fraction | Over 24 |
|---|---|
| 3/4 | 18/24 |
| 5/8 | 15/24 |
| 2/3 | 16/24 |
| 7/12 | 14/24 |
| 5/6 | 20/24 |
- Sort the new numerators: 14, 15, 16, 18, 20.
- Write the original fractions in that order: 7/12, 5/8, 2/3, 3/4, 5/6.
For largest to smallest, reverse it: 5/6, 3/4, 2/3, 5/8, 7/12.
Always give the answer in the original fractions, not the rewritten ones. The question asked about 3/4, not 18/24.
If finding one common denominator for the whole list is awkward, you can also compare the fractions in pairs by cross-multiplying, the way you’d sort cards by hand. For five fractions that’s up to ten comparisons, so a single common denominator, or a quick switch to decimals, is usually less work.
Sorting a Long List Into Groups First
For a long list, you can save work by sorting the fractions into rough groups before comparing anything exactly. The benchmarks from earlier make three groups:
- Below 1/2: the top doubled is less than the bottom.
- Between 1/2 and 1: the top doubled is more than the bottom, but the top is less than the bottom.
- Above 1: the top is bigger than the bottom.
Example: order 5/12, 9/10, 3/7, 7/6, 4/7 and 5/4.
| Group | Fractions |
|---|---|
| Below 1/2 | 5/12, 3/7 |
| Between 1/2 and 1 | 9/10, 4/7 |
| Above 1 | 7/6, 5/4 |
Now only the pairs inside each group need comparing:
- 5/12 vs 3/7: 5 × 7 = 35 and 3 × 12 = 36, so 5/12 < 3/7.
- 4/7 vs 9/10: 4/7 is 3/7 short of a whole, and 9/10 is only 1/10 short, so 4/7 < 9/10.
- 7/6 vs 5/4: 7/6 is 1/6 over a whole, and 5/4 is 1/4 over, so 7/6 < 5/4.
The full order is 5/12, 3/7, 4/7, 9/10, 7/6, 5/4. Three quick comparisons replaced a common denominator of 420.
Finding a Fraction Between Two Fractions
Ordering questions sometimes ask the reverse: name a fraction that sits between two others. There’s always one, however close the two fractions are.
Method 1: rewrite with a bigger denominator. 5/8 and 2/3 are 15/24 and 16/24, with no whole number between 15 and 16. Double both tops and bottoms to get 30/48 and 32/48. Now 31/48 sits between them.
Method 2: take the average. Add the two fractions and halve the result. (5/8 + 2/3) ÷ 2 = (15/24 + 16/24) ÷ 2 = 31/48, the exact midpoint.
Method 3: add the tops and add the bottoms. For two different positive fractions, (5 + 2)/(8 + 3) = 7/11 always lands somewhere between them. Check with decimals: 5/8 = 0.625, 7/11 ≈ 0.636 and 2/3 ≈ 0.667. This isn’t how you add fractions, and 7/11 isn’t the midpoint, but it’s a quick way to find a fraction in the gap.
Since you can repeat any of these methods forever, there are infinitely many fractions between any two different fractions.
Comparing a Fraction With a Whole Number
To compare a fraction with a whole number, write the whole number over the same denominator. 3 = 15/5, so 17/5 is more than 3. 4 = 24/6, so 23/6 is just less than 4.
The quick version: multiply the whole number by the denominator and compare the result with the numerator. For 29/9 and 3, 3 × 9 = 27, which is less than 29, so 29/9 > 3. Dividing gives the same answer in mixed-number form: 29 ÷ 9 = 3 remainder 2, so 29/9 = 3 2/9.
Mixed Numbers and Improper Fractions
With mixed numbers, compare the whole-number parts first. 3 1/8 is bigger than 2 7/8, because 3 > 2. The fractions only matter when the whole numbers match.
Example: 2 3/5 or 2 4/7? The whole parts are both 2, so compare 3/5 and 4/7. Cross-multiplying gives 3 × 7 = 21 and 4 × 5 = 20, so 3/5 is bigger, and 2 3/5 > 2 4/7.
When an improper fraction meets a mixed number, convert one into the form of the other. 13/4 = 3 1/4, and 3 1/4 is more than 3 1/5. Or turn both into decimals: 13/4 = 3.25 and 3 1/5 = 3.2. Either way, 13/4 > 3 1/5.
Negative Fractions
Below zero, the order flips. −1/2 is further below zero than −1/3, so −1/2 < −1/3, even though 1/2 > 1/3.
To order a list that includes negatives, put the negatives first, starting with the one furthest from zero. Then come zero and the positives in the usual order. For −1/2, 2/5, −1/3 and 3/8, the order from smallest to largest is −1/2, −1/3, 3/8, 2/5. (2/5 = 0.4 and 3/8 = 0.375.)
Fractions, Decimals and Percents in One List
Convert everything to the same form. Decimals are usually easiest.
Example: order 0.6, 5/8, 62% and 3/5.
| Value | As a decimal |
|---|---|
| 0.6 | 0.6 |
| 5/8 | 0.625 |
| 62% | 0.62 |
| 3/5 | 0.6 |
From smallest to largest: 0.6 = 3/5, then 62%, then 5/8. Two values in the list are exactly equal, which is easy to miss when they’re written differently.
How Much Bigger? Finding the Difference
Knowing which fraction is bigger is often only half the question. To find out by how much, subtract the smaller from the larger over a common denominator.
- 2/3 − 5/8 = 16/24 − 15/24 = 1/24
- 3/4 − 2/3 = 9/12 − 8/12 = 1/12
- 9/10 − 7/8 = 36/40 − 35/40 = 1/40
Sometimes the question wants a relative difference instead, as a percent. Divide the difference by the fraction you’re comparing against:
- 2/3 is bigger than 5/8 by (1/24) ÷ (5/8) = 1/15, or about 6.67%.
- 5/8 is smaller than 2/3 by (1/24) ÷ (2/3) = 1/16, or 6.25%.
The two percents differ because they’re measured from different starting points, the same way a percentage increase and decrease between two numbers differ. The Percentage Change Calculator works these out for any two values once you’ve turned the fractions into decimals.
Mistakes That Catch People Out
- “Bigger bottom, bigger fraction.” It’s the other way round when the tops match. 1/8 is smaller than 1/4, because the pieces are smaller.
- Comparing only the tops across different bottoms. 4/9 has a bigger top than 2/3, but 4/9 ≈ 0.444 and 2/3 ≈ 0.667.
- Looking at the gap between top and bottom. 2/3 and 3/4 are both “one short”, so they look equal, but 2/3 ≈ 0.667 and 3/4 = 0.75. The size of each piece matters, not just how many are missing.
- Treating “closer to 1” as “bigger” for fractions above 1. 3/2 is closer to 1 than 7/4, but 7/4 is bigger.
- Swapping the cross products. Keep each product next to the numerator it came from.
- Comparing parts of different wholes. Half of a small pizza isn’t the same amount as half of a large one. Fractions only compare fairly when they’re fractions of the same whole.
Worked Word Problems
Recipes. One recipe needs 2/3 cup of sugar and another needs 3/4 cup. Which uses more? Cross-multiply: 2 × 4 = 8 and 3 × 3 = 9, so 3/4 cup is more, by 1/12 cup.
Test scores. Ali got 17/20 on one test and 21/25 on another. Which is the better score? Over 100, they’re 85/100 and 84/100, so 17/20 is better by 1 percentage point. The Test Score Calculator turns any score into a percent.
Progress. Sara has read 5/8 of a book and Bilal has read 2/3 of the same book. Who has read more? From the cross-multiplying example, 5/8 < 2/3, so Bilal is ahead, by 1/24 of the book.
Wrench and drill sizes. A toolbox has sockets marked 3/8, 5/16, 1/2, 7/16, 9/16 and 1/4 inch. To put them in order, rewrite them all in sixteenths: 6/16, 5/16, 8/16, 7/16, 9/16 and 4/16. Sorted from smallest to largest, that’s 1/4, 5/16, 3/8, 7/16, 1/2, 9/16. The same trick works with drill bits in 32nds and 64ths: 19/32 is just under 5/8, because 5/8 = 20/32.
Chances. Bag A has 3 red marbles out of 8, and bag B has 2 red out of 5. Which bag gives the better chance of picking red? Cross-multiply 3/8 and 2/5: 3 × 5 = 15 and 2 × 8 = 16, so bag B’s 2/5 is the better chance, even though bag A has more red marbles. Doubling bag B to 4 red out of 10 keeps that 2/5 chance for one pick, though not for two picks in a row, as the equivalent fractions of 2/5 page shows.
Different wholes. A large pizza has 3/8 left and a small pizza has 1/2 left. You can’t say which has more pizza from the fractions alone, because the wholes are different sizes. 1/2 is the bigger fraction, but it may be less food.
Practice Questions
- Which is bigger: 5/7 or 5/9?
- Which is bigger: 4/11 or 7/11?
- Which is bigger: 3/5 or 5/8?
- Is 7/15 more or less than 1/2?
- Order from smallest to largest: 1/2, 2/5, 3/4, 7/10.
- Which is bigger: 1 5/6 or 11/6?
- Order from smallest to largest: −2/3, 1/4, −3/4, 0.
- Is 31/8 more or less than 4?
- Name a fraction between 3/5 and 2/3.
Answers
- 5/7. Same tops, and 7 is the smaller bottom.
- 7/11. Same bottoms, and 7 > 4.
- 5/8. Cross-multiply: 3 × 8 = 24 and 5 × 5 = 25.
- Less. 7 × 2 = 14, which is less than 15.
- 2/5, 1/2, 7/10, 3/4. Over 20, they’re 8/20, 10/20, 14/20 and 15/20.
- They’re equal. 1 5/6 = 6/6 + 5/6 = 11/6.
- −3/4, −2/3, 0, 1/4.
- Less. 4 × 8 = 32, which is more than 31, so 31/8 = 3 7/8.
- 19/30 is one answer. Over 15, the two fractions are 9/15 and 10/15. Over 30, they’re 18/30 and 20/30, with 19/30 between them. Adding the tops and the bottoms gives another answer, 5/8.
Checking Your Answer With the Calculator
The calculator at the top of this page compares any two fractions and shows the working. Open the Check two fractions tab and type the two fractions into its boxes.
The result says whether the fractions are equivalent. If they aren’t, it names the bigger one and the difference. For 7/12 and 5/8, it says 5/8 is bigger, by 1/24. The steps show the cross products, 7 × 8 = 56 and 5 × 12 = 60, so you can match them against your own working. For listing equivalent fractions or rewriting a fraction over a new bottom number, the same tool has its own page, the Equivalent Fractions Calculator.
Quick Answers to Common Comparisons
Is 3/4 bigger than 2/3? Yes. Over 12, they’re 9/12 and 8/12, so 3/4 is bigger by 1/12.
Is 1/3 bigger than 1/4? Yes. Both have a top of 1, and thirds are bigger pieces than quarters. The difference is 1/12.
Which is bigger, 5/8 or 3/4? 3/4, because 3/4 = 6/8. It’s bigger by 1/8.
Which is bigger, 3/5 or 2/3? 2/3. Cross-multiplying gives 3 × 3 = 9 and 2 × 5 = 10. The difference is 1/15.
Is 7/8 bigger than 3/4? Yes. 3/4 = 6/8, so 7/8 is bigger by 1/8.
Which is bigger, 4/5 or 7/9? 4/5. Cross-multiplying gives 4 × 9 = 36 and 7 × 5 = 35. The missing pieces agree: 4/5 is 1/5 short of a whole and 7/9 is 2/9 short, and 1/5 = 9/45 is less than 2/9 = 10/45.
How do you compare fractions with different denominators? Rewrite them over a common denominator and compare the tops, or cross-multiply. Both methods give the same answer, because cross-multiplying is the common-denominator method with the denominator left out.
